Skip to content

Adapters, Rails, Hardware & Gear

Gear & Furnishings

B&T gear and furnishings are the branded extras that show your support for American-made precision: counter mats, coasters, displays, and office pieces from the shop that makes Atlas bipods and Accu-Shot monopods. These are the items that dress up a bench, a shop, or a display case. Browse the lineup and add a piece of B&T to your space.

Gen. 2 BT27: Folding Foregrip

When a member of a government agency asked us why the BT27 did not offer a 45 degree position, we did not have an answer. Now it does! The newly redesigned BT27 Folding Foregrip offers two opposing flat surfaces to secure light switches with the installed Buna O-Rings. Removing the bottom cap reveals a storage compartment designed to hold a single 123 battery. The unique design protects the battery from being drained by placing the positive side (+) towards the relieved cap. We also trimmed the handle to decrease weight while maintaining battery storage and touch pad retainers. Attaches to standard Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
  • Deployed Length: 4.073"
  • Folded Length: 4.032"
  • Weight: 5.370 ounces
$104.95 Configure

BT53: SILO

The BT53 SILO is a novel and patented product that attaches by means of a Picatinny rail. It provides a textured front that can be pressed into barricades, rubber side bars for “soft” side bracing and grip, 600 denier cordura "bean-bag" bottom for “soft” interface on ledges, windows etc. and two flush cups. One of the two flush cups is designed to accept our novel BT54 Flush Cup Stud (NOT included with purchase of a BT53). It is an option sold separately that allows the BT53 SILO to be easily installed, moved and removed with the push of a button. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized.
  • Length Approx: 3.75"
  • Width Approx: 2.36"
  • Height Approx: 1.78"
  • Weight: 7.8 ounces
$99.95 Configure

BT54: Flushcup Stud

The BT54 Flushcup Stud is a novel means to quickly install, move or remove accessories to a Picatinny rail, IF the accessory has a corresponding flushcup hole that aligns with the slots of the Picatinny rail. The BT54 was conceived and designed for use with our BT53 SILO. Available in black only. Weight: 1.0 ounce
$19.95 Configure

BT40: Bitter & Twisted Mortar Model Display

We are proud to offer the Bitter & Twisted Mortar model display. Constructed from turned and stamped Stainless Steel and quarter sawn American White Oak, this display is legitimate in structure with thoughtful details throughout.  The Mortar Barrel and Pinions are turned from 303 stainless steel bar stock with bored trunnion pockets. The trunnions are pressed into the pockets then welded in place. They rest on a pair of stainless steel bearing plates in the Mortar model Base and is retained by a pair of Stainless Steel Top Straps via two ¼-20 Stainless Steel Button Head cap screws per strap. They pass through the straps then into the side and thread into the Stainless Steel handle found on each Side of the Base. Strength is obtained and secured by steel on steel threads. Details below. Aside from a great conversation piece displayed on a desktop, mantle or as serious bookend — this Bitter & Twisted Mortar Model Display is 22 pounds of stainless steel and white oak that is proudly manufactured and assembled by Americans in Wichita, Kansas with love.
$1,349.95 Configure

BT41: B&T Letter Opener

B&T Industries L.L.C. is proud to create a letter opener for our customers that want to have a serious desktop accoutrement with purpose and function.  We machined the Handle and Pommel from 300 series Stainless Steel then tumbled to compliment the blade. The blade, made by Spartan Blades, is machined from 440C Stainless Steel given a Rockwell Hardness of C 58-59 with a Cyro treatment followed by Alumina then Ceramic Blast and finally a PVD Chromium coating. The two Buna o-rings prevent rattling when sheathed for a stealthy presentation. The double ground edges along the length of the blade are not sharp, but the point is sharp. More specification and details below.
$299.95 Configure

BT62: Groupy®

The Groupy measures groups within a 1.5” diameter. Measurements are laser cut into acrylic with a glow-in-the-dark cord attached. Shoot three to five shots. Lay Groupy over shot group. Adjust until one of the circles cross the center of the two outer most holes. Read measurement on that circle to determine group size.
$8.95 View Product

BT56 LD: ¼-20 Adapter

The BT56 LD 1/4-20 Adapter is a mounting solution to interface between a tripod or similar supporting device (shooting/walking/camera stick type monopod) with a standard ¼-20 threaded stud and a firearm. Weight: 0.8 ounces
Price range: $16.96 through $19.95 Configure

BT56 LD-L: ¼-20 Lever Adapter

The BT56 LD-L 1/4-20 Lever Adapter is a Picatinny Rail mounting solution to interface between a Tripod or similar supporting device (shooting/walking/camera stick type monopod) with a standard ¼-20 threaded stud and a firearm with Picatinny Rail. Once the BT56 LD-L is installed on your supporting device using the ¼-20 threaded hole, your Picatinny Rail equipped Rifle, Pistol or Shotgun can be quickly mounted and held to your supporting device. This is a great option for getting added support for hunting and tactical situations where a bipod is not practical. The BT56 LD-L will hold your supporting device to the firearm for transitioning or relocation of firearm. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. No hardware included. Available in black only. To order the without the installed ADM-170-S, view the BT56 LD 1/4-20 Adapter Weight: 2.7 ounces
$89.95 View Product

What you will find here

This category collects the non-shooting B&T branded goods. They are made or curated by B&T and carry the same attention to quality as the bipods we are known for.

  • Counter mats and coasters for the bench or shop.
  • Display pieces and collectibles.
  • Office items like the B&T letter opener.

Why B&T branded goods

If you run Atlas gear, these pieces complete the set. They make a good gift for a shooting partner and a clean way to show you back an American manufacturer that stands behind its products for life.

A few questions come up around Gear and Furnishings. We answer where it is made, what is in this collection, and what it does below.

Frequently Asked Questions

What is in the gear and furnishings category?

It collects B&T branded non-shooting goods: counter mats, coasters, display pieces, and office items like the letter opener. They are the branded extras from the maker of Atlas bipods.

Are these made by B&T?

These branded goods are made or curated by B&T Industries, the maker of Atlas bipods and Accu-Shot monopods, and reflect the same focus on quality.

Do these make good gifts?

Yes. B&T gear and furnishings make a good gift for a shooting partner or a clean way to show support for an American manufacturer.

Where are B&T products made?

B&T's core products, Atlas bipods and Accu-Shot monopods, are machined in the USA. Branded goods are produced or curated by B&T to match the brand.

Add some B&T to your space

Browse the gear, or shop Atlas bipods and Accu-Shot monopods. Questions, reach out to our team in Kansas.