Every bipod and monopod B&T Industries sells is supported by a purpose-built accessory line. These are not afterthought add-ons: they are the parts that let the Atlas and Accu-Shot system work on more rifles, mount faster, and adapt to mission-specific needs. Everything is made or sourced to the same standard as the primary products.
The BT85 Atlas® Adjustable Leg Extensions (A.L.E.) were created to satisfy customer demand for a taller Atlas® Bipod.
They fit the V8, PSR and CAL series Atlas® Bipods and our BT22 Atlas® Leg Extensions. Accepts the following optional feet we offer: BT23 Atlas® Ski Feet, BT32 Atlas® Standard Rubber Feet, BT74 Atlas® Raider Cleat Feet
They deliver 9 adjustments within the Elevation Range of 7.125 - 12.0 inches (see second image). They are stackable to achieve a greater range of height and feature a Non-Rotating Leg design (outer leg does not rotate around inner leg).
The stainless steel spring plunger enables easy installation or removal in the field.Machined from 6061-T6 Aluminum with Mil-Spec, Type III hardcoat anodized finish. Sold as a pair. Available in black only.
Total Weight of Pair: 7.520 ounces
The BT84 KRG 10/22 Bravo Rail Kit provides the means to attach an Accu-Shot Precision Rail Monopod (models BT12-QK, BT13-QK and BT31-QK) to the buttstock of a KRG 10/22 Bravo Chassis. It consists of a low profile Picatinny Rail, steel Bar Nut and fasteners.
When a member of a government agency asked us why the BT27 did not offer a 45 degree position, we did not have an answer. Now it does! The newly redesigned BT27 Folding Foregrip offers two opposing flat surfaces to secure light switches with the installed Buna O-Rings. Removing the bottom cap reveals a storage compartment designed to hold a single 123 battery. The unique design protects the battery from being drained by placing the positive side (+) towards the relieved cap. We also trimmed the handle to decrease weight while maintaining battery storage and touch pad retainers. Attaches to standard Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
The BT53 SILO is a novel and patented product that attaches by means of a Picatinny rail. It provides a textured front that can be pressed into barricades, rubber side bars for “soft” side bracing and grip, 600 denier cordura "bean-bag" bottom for “soft” interface on ledges, windows etc. and two flush cups.One of the two flush cups is designed to accept our novel BT54 Flush Cup Stud (NOT included with purchase of a BT53). It is an option sold separately that allows the BT53 SILO to be easily installed, moved and removed with the push of a button.It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized.
The BT54 Flushcup Stud is a novel means to quickly install, move or remove accessories to a Picatinny rail, IF the accessory has a corresponding flushcup hole that aligns with the slots of the Picatinny rail. The BT54 was conceived and designed for use with our BT53 SILO. Available in black only.Weight: 1.0 ounce
Sold as a single 10-32 x 1.25" Clamp Bolt - Flat Head Fastener. The material is 4140 Alloy Steel with a manganese phosphate finish.
Purchasing a quantity of two (2) 10-32 x 1.25" Clamp Bolts - Flat Head Fasteners would be ideal for use with any 2-screw clamp Atlas® Bipod mounts (BT10, BT65, BT69, BT72).
Purchasing a quantity of one (1) 10-32 x 1.25" Clamp Bolt - Flat Head Fastener would be ideal for use with any Precision Rail Mount (PRM) Accu-Shot® Monopod (BT12, BT13, BT31).We have also used 10-32 x 1.25" Socket Cap Screws for contractual fulfillments available.
Sold as a single 10-32 x 1.25" Socket Cap Screw.
Purchasing a quantity of two (2) 10-32 x 1.25" Socket Cap Screws would be ideal for use with any 2-screw clamp Atlas® Bipod mounts (BT10, BT65, BT69, BT72). These are what we have used for contractual fulfillments.
Purchasing a quantity of one (1) 10-32 x 1.25" Socket Cap Screw would be ideal for use with any Precision Rail Mount (PRM) Accu-Shot® Monopod (BT12, BT13, BT31).
The BT22 Atlas® Leg Extensions are easily installed to any V8, PSR or CAL series Atlas® Bipod with the press of a stainless steel plunger. They provide an additional 3 inches of elevation and accept any of our optional V8, PSR or CAL feet. They will also fit bipods/adapters that use Atlas® feet. Sold as a pair. Available in black only. NSN 1005-01-641-0369Total Weight of Pair: 1.8 ounces
The BT23 Atlas® Ski Feet are easily installed to any V8, PSR or CAL series Atlas® Bipod with the press of a stainless steel plunger. They will lay flat in the 90 degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod. They will also fit bipods/adapters that use Atlas® feet. Sold as a pair. Available in black only. NSN 1005-01-640-8881Total Weight of Pair: 1.5 ounces
The BT74 Atlas® Raider Cleat Feet are turned from 303 Stainless Steel bar stock in one piece for strength and durability. They will fit V8,PSR and CAL series of Atlas® Bipods. They will also fit bipods/adapters that use Atlas® feet. Easily installed with the press of a stainless steel plunger.The Cleat portion is approximately 1.000” long with the largest outer diameter of approximately 1.155”. Sold as a pair. Available in raw stainless steel only.
NSN 1005-01-700-6502
Total Weight of Pair: 2.6 ouncesProduct will work on V8, PSR and CAL models only.
The BT32 Atlas® Standard Rubber Feet are standard equipment on all V8, PSR or CAL series Atlas® Bipods. They will also fit bipods/adapters that use Atlas® feet. Easily installed with the press of a stainless steel plunger. Sold as a pair. Available in black only.Weight: 1.0 ounce
BT49 2.05" Adjustable Picatinny Rail ($29.95): Adjustable-angle short rail for angled mounting surfaces.
BT70 Atlas M-LOK Adapter ($34.95): Mounts an Atlas bipod directly to an M-LOK slot. No rail required.
BT73 M-LOK Rail ($34.95): Short Picatinny section for M-LOK handguards, for when you want a rail instead of a direct adapter.
BT80 M-LOK Flush Cup Rail ($44.95): M-LOK section with an integrated flush-cup sling socket.
BT81 Lil' Brandi Sling Stud to Picatinny Rail Adapter ($54.95): Converts a sling stud mounting point to a short Picatinny rail section for bipod or accessory mounting.
Feet and Hardware
Replace or upgrade the feet on your Atlas bipod, or extend leg length:
BT32 Atlas Standard Rubber Feet ($29.95): Replacement rubber feet for V8 and compatible Atlas bipods.
BT23 Atlas Ski Feet ($59.95): Wide ski-style feet for soft ground, sand, and snow.
BT74 Atlas Raider Cleat Feet ($74.95): Aggressive-tread cleat feet for hard surfaces and wet rock.
BT55 Atlas 5-H and Super CAL Rubber Feet ($34.95): Rubber feet sized for 5-H and Super CAL series bipods.
BT66 Atlas 5-H BAS Ski Feet ($99.95): Ski feet for 5-H and Super CAL bipods.
BT75 Atlas 5-H and Super CAL Raider Cleat Feet ($94.95): Cleat feet for 5-H and Super CAL series.
BT22 Atlas Leg Extensions ($59.95): Extend Atlas V8/PSR/CAL bipod legs for higher shooting positions.
BT85 Atlas Adjustable Leg Extensions ($129.95): Adjustable-length extensions for more range in leg height.
Pouches and Gear
Carry, protect, and configure your bipod for field use:
BT30 Atlas Bipod Pouch ($89.95, black): Purpose-built padded pouch for Atlas bipods. Fits in a pack or attaches to gear. Also available in Coyote Brown (BT30-C, $59.95), Ranger Green (BT30-R, $59.95), and Large (BT30-S5, $99.95).
BT53 SILO ($84.95): Bipod carry and deployment system for tactical applications.
BT27 Folding Foregrip (Gen.2): Folding foregrip that shares the Atlas mounting interface for a unified accessory platform.
BT07 Tac-Cap ($9.95): Steel cap for Accu-Shot QK monopods. Adds grip and weight at the monopod foot.
BT03 M1-A/AR-15 A2 Stock Sling Stud Accessory ($18.95): Adds a sling stud mounting point to M1A and AR-15 A2 fixed stocks.
Accessories at a glance
Group
What it does
Key products
From price
Clamps and Adapters
Mount bipod to ARCA, QD, or Picatinny interfaces
ADM-170-S, Area 419 ARCALOCK, Arisaka Slider, RRS BTC-Pro, ADM QD
$30.00
Picatinny Rails / M-LOK
Add rail or bridge M-LOK to Picatinny
BT15, BT17, BT34, BT49, BT70, BT73, BT80, BT81
$29.95
Feet and Hardware
Upgrade or replace bipod feet; extend legs
BT32, BT23, BT74, BT55, BT66, BT75, BT22, BT85
$29.95
Pouches and Gear
Carry, protect, and field-configure bipods
BT30 series, BT53, BT27, BT07, BT03
$9.95
Not sure which option fits your setup? The answers below cover how the options compare, which option to choose, and what fits your rifle across the Accessories lineup.
Frequently Asked Questions
What is the difference between ADM-170-S and ADM-5-H?
The ADM-170-S is a lever clamp designed for the Atlas V8, PSR, and CAL bipods. The ADM-5-H is the lever clamp sized for the Atlas 5-H series bipod. Check your bipod model before ordering.
Can I mount an Atlas bipod to an ARCA rail?
Yes. The Area 419 ARCALOCK clamps and the ADM QD ARCA mount allow Atlas bipods to attach to ARCA-Swiss compatible rails. Several options are available depending on whether you want quick-detach or a solid lock.
What does the BT70 M-LOK adapter do?
The BT70 lets you mount an Atlas bipod directly to an M-LOK slot on your handguard without installing a Picatinny rail section. It is a direct M-LOK-to-Atlas interface.
Which feet should I buy for field shooting?
For soft ground: ski feet (BT23 for V8/PSR/CAL, BT66 for 5-H). For hard surfaces and rock: cleat feet (BT74 for V8/PSR/CAL, BT75 for 5-H). For general use: standard rubber feet (BT32 or BT55 depending on your bipod series).
Do bipod pouches fit all Atlas models?
The BT30 standard pouch fits most Atlas bipods at standard to mid height. The BT30-S5 Large accommodates taller or CAL-series bipods. Check dimensions against your specific bipod configuration.
Are accessories covered by the B&T warranty?
Yes. Accessories manufactured by B&T Industries carry the same no-fine-print lifetime warranty. Third-party accessories (ADM, Area 419, Arisaka, RRS) carry the warranties of their respective manufacturers.
What does BT81 Lil' Brandi do?
The BT81 converts a sling stud mounting point into a short Picatinny rail section. Use it to mount a bipod on a stock with only a sling stud, or to add a Picatinny accessory rail to that same location.
Equip your system
Navigate to the accessory group that fits your need above, or browse the full accessories catalog. Everything ships from the USA. B&T-manufactured accessories carry the no-fine-print lifetime warranty.
