Skip to content

Adapters, Rails, Hardware & Gear

Atlas® Bipod Accessories

Atlas bipod accessories tune your bipod to your terrain and your reach: swap feet for the ground you shoot on, add leg extensions for height, and grab the small parts that complete your setup. This page covers the feet, extensions, and add-ons that fit the Atlas line, so you can match the bipod to hard ground, soft ground, or a position that needs more height. Everything is American-made and backed by a lifetime warranty.

BT85 Atlas® Adjustable Leg Extensions

The BT85 Atlas® Adjustable Leg Extensions (A.L.E.) were created to satisfy customer demand for a taller Atlas® Bipod. They fit the V8, PSR and CAL series Atlas® Bipods and our BT22 Atlas® Leg Extensions. Accepts the following optional feet we offer: BT23 Atlas® Ski Feet, BT32 Atlas® Standard Rubber Feet, BT74 Atlas® Raider Cleat Feet They deliver 9 adjustments within the Elevation Range of 7.125 - 12.0 inches (see second image). They are stackable to achieve a greater range of height and feature a Non-Rotating Leg design (outer leg does not rotate around inner leg). The stainless steel spring plunger enables easy installation or removal in the field. Machined from 6061-T6 Aluminum with Mil-Spec, Type III hardcoat anodized finish. Sold as a pair. Available in black only. Total Weight of Pair: 7.520 ounces
$129.95 Configure

BT22: Atlas® Leg Extensions

The BT22 Atlas® Leg Extensions are easily installed to any V8, PSR or CAL series Atlas® Bipod with the press of a stainless steel plunger. They provide an additional 3 inches of elevation and accept any of our optional V8, PSR or CAL feet. They will also fit bipods/adapters that use Atlas® feet. Sold as a pair. Available in black only. NSN 1005-01-641-0369 Total Weight of Pair: 1.8 ounces 

Product will work on V8, PSR and CAL models only.

BT23: Atlas® Ski Feet

The BT23 Atlas® Ski Feet are easily installed to any V8, PSR or CAL series Atlas® Bipod with the press of a stainless steel plunger. They will lay flat in the 90 degree position only. The BT23 delivers a fully articulated smooth foot to support the bipod. They will also fit bipods/adapters that use Atlas® feet. Sold as a pair. Available in black only. NSN 1005-01-640-8881 Total Weight of Pair: 1.5 ounces

Product will work on V8, PSR and CAL models only.

BT74: Atlas® Raider Cleat Feet

The BT74 Atlas® Raider Cleat Feet are turned from 303 Stainless Steel bar stock in one piece for strength and durability. They will fit V8, PSR and CAL series of Atlas® Bipods. They will also fit bipods/adapters that use Atlas® feet. Easily installed with the press of a stainless steel plunger. The Cleat portion is approximately 1.000” long with the largest outer diameter of approximately 1.155”. Sold as a pair. Available in raw stainless steel only. NSN 1005-01-700-6502 Total Weight of Pair: 2.6 ounces Product will work on V8, PSR and CAL models only.

BT32: Atlas® Standard Rubber Feet

The BT32 Atlas® Standard Rubber Feet are standard equipment on all V8, PSR or CAL series Atlas® Bipods. They will also fit bipods/adapters that use Atlas® feet. Easily installed with the press of a stainless steel plunger. Sold as a pair. Available in black only. Weight: 1.0 ounce

BT30-B: Black Atlas® Bipod Pouch

The BT30-B Black Atlas® Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas® Bipods. They offer a pocket for the BT22 Atlas® Leg Extensions and another for optional Atlas® feet. Made out of 1000 denier cordura nylon. Also available in Coyote Brown and Ranger Green See below for fitment compatibility and dimensions. Weight: 7.9 ounces

BT30-C: Coyote Brown Atlas® Bipod Pouch

The BT30-C Coyote Brown Atlas® Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas® Bipods. They offer a pocket for BT22 Atlas® Leg Extensions and another for optional Atlas® feet. Made out of 1000 denier cordura nylon. Also available in Ranger Green and Black. See below for fitment compatibility and dimensions. Weight: 7.9 ounces

BT30-S5: Large Atlas® Bipod Pouch

The BT30-S5 Large Atlas® Bipod Pouch accommodates the Super CAL and 5-H model Atlas® Bipods. They feature a pocket for optional Atlas feet. While it has the capacity to fit Standard and Tall height Atlas Bipod models (V8, PSR and CAL), they are designed to fit our larger models of Atlas Bipod (Super CAL and 5-H). Made out of 1000 denier cordura nylon in Coyote Brown. Weight: 12.2 ounces

BT30-R: Ranger Green Atlas® Bipod Pouch

The BT30-R Ranger Green Atlas® Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas® Bipods. They offer a pocket for the BT22 Atlas® Leg Extensions and another for optional Atlas® feet. Made out of 1000 denier cordura nylon. Also available in Coyote Brown and Black See below for fitment compatibility and dimensions. Weight: 7.9 ounces

BT55: Atlas® 5-H & Super CAL Rubber Feet

The BT55 Atlas® 5-H and Super CAL Rubber Feet are standard equipment on all 5-H and Super CAL models of Atlas® Bipods. They are easily installed with the press of a stainless steel plunger. Sold as a pair. Available in black only. Weight: 2.1 ounces Product will work on 5-H and Super CAL models only.

BT66: Atlas® 5-H & Super CAL BAS Ski Feet

The BT66 Atlas® 5-H and Super CAL BAS Ski Feet were developed from listening to customer feedback. Starting with 3.5" 6061-T6 bar stock, these monsters are made to slide in both the 90 and 45 degree leg positions. They are easily installed with the press of a stainless steel plunger to the 5-H and Super CAL models of Atlas® Bipod. Sold as a pair. Weight: 6.16 ounces Product will work on 5-H and Super CAL models only.

Feet for every surface

The right feet make a real difference in how the bipod grips and loads. Atlas feet swap quickly so you can match the ground.

  • Rubber feet: The all-around choice for hard surfaces, benches, and mixed ground. Quiet and grippy.
  • Spike and cleat feet: Bite into soft ground, dirt, and grass for a planted, loadable base. The BT74 Raider cleat feet are built for this.
  • Ski feet: The BT66 ski feet give a wider, stable footprint on soft or uneven surfaces and help the bipod track when you load it.

Leg extensions for more height

When your position needs the rifle higher than the bipod's standard range, leg extensions add reach. The BT22 Atlas leg extensions and the BT85 adjustable leg extensions extend your effective height, and they are stackable for an even greater range. That lets one bipod cover prone on the ground and a taller sitting or kneeling position in grass without buying a second bipod.

Small parts that complete the setup

A few add-ons round out the kit. From the ADM-170-S quick-detach lever to a bipod pouch for carry, these accessories keep your Atlas configured the way you shoot and protected when you are not. Browse the full set and match them to your bipod model and your typical conditions.

Choosing within Atlas Bipod Accessories comes down to a few key questions. We answer which option to choose, what fits your rifle, and foot options below to help you decide.

Frequently Asked Questions

What feet are best for an Atlas bipod?

Rubber feet suit hard surfaces and mixed ground; spike or cleat feet like the BT74 bite into soft ground for a loadable base; ski feet like the BT66 give a wider footprint on soft or uneven terrain. Match the feet to where you shoot.

Do Atlas bipod feet swap easily?

Yes. Atlas feet are designed to swap so you can match the ground you are shooting on, from rubber for hard surfaces to spikes or ski feet for soft terrain. It is a quick change with basic tools.

How do I add height to my Atlas bipod?

Use leg extensions. The BT22 Atlas leg extensions and BT85 adjustable extensions add reach, and they are stackable for even more height, so one bipod can cover prone and taller sitting or kneeling positions.

Are Atlas leg extensions stackable?

Yes. The BT22 and BT85 leg extensions stack to achieve a greater range of height, letting you adapt one bipod from low prone to a taller position in grass or on a slope.

What is the BT74 Raider cleat feet?

The BT74 Raider cleat feet are an Atlas foot option that bites into soft ground, dirt, and grass for a planted base you can load against. They are a good choice for field and hunting use on natural terrain.

Will these accessories fit my Atlas model?

Most feet and extensions fit across the Atlas line, but exact compatibility depends on your model. Check the product page for fitment, or reach out to our team in Kansas to confirm the right parts for your bipod.

Tune your bipod

Ready to dial it in? Shop feet for your terrain, leg extensions for more height, and the small parts that complete your setup. Not sure what fits your model, reach out to our team in Kansas.