Blemished Monopods & Bipods
Factory seconds are products that did not meet B&T Industries’ cosmetic standard during inspection. Finish imperfections, light anodize variation, minor tooling marks. The mechanical function is identical to first-quality production. Every blemished unit is inspected and tested before it leaves. Stock is limited, intermittent, and sells fast when it drops. If you see your model listed here, it is in hand and priced to move.
No products match the selected filters.
Clear filtersHow blemished products work
- Cosmetic only: Blemishes are finish-level: anodize variation, light surface marks, or minor tooling artifacts from machining. Nothing that affects how the product functions, holds adjustment, or wears over time.
- Fully functional: Every unit is function-checked before listing. If it does not pass inspection, it does not ship.
- Same lifetime warranty: The no-fine-print lifetime warranty applies to blemished units exactly as it does to first-quality products. No exclusions, no asterisks.
- Limited and intermittent stock: Blemished inventory is not restocked on a schedule. When these units sell, they are gone until the next inspection run produces more. If you see it, it is available now.
- Typically 15-25% off: Savings vary by product; check the current listing. You pay less for a cosmetic imperfection, not a compromised product.
How to shop blemished
Blemished products link to the same configurable product page as first-quality units. Select the Condition option for 'Blemished' to see the discounted price and confirm stock. If blemished stock is depleted, first-quality inventory is available on the same page.
Current blemished inventory examples
| Product | Series | New Price | Blemished Price | Savings | Status |
|---|---|---|---|---|---|
| BT46-NC PSR Atlas Bipod | PSR / Standard | $289.95 | $246.46 | ~$43 | Check listing |
| BT10 V8 Atlas Bipod | V8 | $229.95 | $195.46 | ~$34 | Check listing |
| BT12-QK PRM Monopod | PRM / Standard | $99.95 | $84.96 | ~$15 | Check listing |
| BT13-QK PRM Monopod | PRM / Mid | $104.95 | $89.21-93.46 | ~$12-16 | Check listing |
| BT31-QK PRM Monopod | PRM / Extended | $109.95 | $93.46 | ~$16 | Check listing |
| BT05-QK Sling Stud Monopod | Sling Stud / Mid | $99.95 | $84.96 | ~$15 | Check listing |
| BT57-QK AI AT Monopod | AI AT Chassis | $159.95 | $135.96-145.91 | ~$14-24 | Check listing |
| BT08-QK ASAI Monopod | AI / ASAI | $179.95 | $152.96 | ~$27 | Check listing |
| BT65-NC Gen.2 CAL Atlas Bipod | CAL / Gen2 | $289.95+ | $225.21 | ~$65+ | Check listing |
Inventory changes continuously. Listed prices and availability are current at time of publication and subject to change. Check the live listing for real-time stock and price.
What to expect when your blemished product arrives
- A finished, assembled, and function-tested B&T Industries product.
- A cosmetic imperfection visible under close inspection. Location and nature of the blemish vary by unit.
- The same packaging and documentation as a first-quality product.
- Full warranty coverage. If it ever fails mechanically, warranty applies.
Choosing within Blemished (Factory Seconds) comes down to a few key questions. We answer how the options compare, warranty coverage, and blemished units below to help you decide.
Frequently Asked Questions
Are blemished products mechanically sound?
Yes. Blemishes are cosmetic only. Every unit is function-checked before listing. Mechanical problems disqualify a unit from the blemished category.
Does the lifetime warranty apply to blemished products?
Yes, in full. The no-fine-print lifetime warranty applies to blemished units with no additional exclusions.
Can I return a blemished product?
B&T's standard return policy applies. Because you are purchasing a product with a known cosmetic imperfection, the blemish itself is not grounds for return.
How often does blemished stock arrive?
There is no fixed schedule. Blemished units accumulate from production inspection runs and are listed when ready. Signing up for restock notifications is the best way to catch new inventory.
Will the blemish affect the anodize durability?
No. Blemishes are surface-level cosmetic variations in the anodize, not structural failures of the coating. The underlying hardcoat anodize is intact and protective.
Are blemished bipods the same as refurbished or used?
No. Blemished means cosmetic factory seconds that were never sold. They are new products that did not pass cosmetic QC. Refurbished means a product that was returned and repaired.
What if my blemished product has a mechanical problem?
Contact B&T Industries. Mechanical issues are covered under the lifetime warranty regardless of whether the product was first-quality or blemished.
Check current blemished stock
Inventory updates whenever a new batch clears inspection. Stock is first-come, first-served. If your model is not listed today, check back or browse first-quality inventory on the main category pages.