Accessories

The BT75 Atlas® 5-H & Super CAL Raider Cleat Feet are turned from 416 Stainless Steel bar stock in one piece for strength and durability. They will fit 5-H and Super CAL model Atlas® Bipods. Easily installed with the press of a stainless steel plunger. The Cleat portion is approximately 1.225” long with the largest outer diameter of approximately 1.443”. Sold as a pair. Available in raw stainless steel only. NSN 1005-01-708-8219 Total Weight of Pair: 4.76 ounces Product will work on 5-H and Super CAL models only.

The BT51 ACE bracket was designed for the popular A.C.E. Skeleton Stock and provides the means to attach an Accu-Shot Precision Rail Monopod (BT12-QK, BT13-QK and BT31-QK) to your A.C.E. Skeleton Stock. It is machined from 6061-T6 aluminum Mil-Spec Type III hard anodized. Besides the Picatinny rail for the PRM, the BT51 has two flush cups for attaching slings. The two piece bracket is clamped to the angular tube and is held in place with the four supplied SHCS fasteners. No modification is required. A 5/32 hex wrench is required but NOT included. Available in black only. Weight: 2.9 ounces

The BT52 ACS/STR Picatinny Rail Adaptor for the popular Magpul ACS and STR style stocks provides the means to attach an Accu-Shot Precision Rail Monopod (BT12-QK, BT13-QK and BT31-QK) to your Magpul ACS and STR Stock. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized and steel. The two piece adaptor replaces the polymer insert found on these stocks and is held in place with the supplied fasteners. Other than removing the buttpad and sliding the insert out, no modification is required. A 1/8 hex wrench is required but NOT included. Available in black only. Weight: 1.0 ounce

The BT29 Sako TRG Rail Kit comes complete and ready to install onto your TRG stock. The kit allows for the installation of the BT12-QK Accu-Shot Precision Rail Monopod (BT12-QK is shown but not included). It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.  Weight: 1.15 ounces Installation of the BT29 REQUIRES the temporary removal of the butt pad assembly and drilling of a second hole. Although, this can be accomplished with common hand tools, B&T Industries L.L.C. strongly recommends a competent Gunsmith install the BT29 Sako TRG Rail Kit.

BT78: SIG SAUER® CROSS™ Buttstock Rail Kit is a 2.05" Picatinny Rail that installs directly onto the folding buttstock of the SIG SAUER® CROSS™ rifle to allow for mounting our Accu-Shot Precision Rail Monopods (BT12-QK, BT13-QK and BT31-QK). Installation requires two factory 10-24 threaded holes spaced approximately 1.57" apart as found on our sample SIG SAUER® CROSS™ RIFLE (*see details below). No modification is required. Comes with two 10-24 x 3/4" flat socket cap screws as seen. Use of a thread locker upon installation is suggested. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only. Weight: 0.56 ounces Length: 2.05"

The BT39 AI Monopod Bracket (AIMB) is an adapter required to attach the BT08-QK ASAI monopod (used with the original “legacy” AI style stocksides) to the new Accuracy International “Gen 2” style stocksides. It is machined from 4140 steel with a manganese phosphate finish. Modification to the Buttstock Stocksides (skins) is required to accept the BT39 AIMB. The BT39 AIMB is mounted to the AI frame using your existing BT08 Stock Collar Fastener (this fastener is not included in the BT39, it is included with the BT08) being threaded to the lower AI butt pad bolt. The BT08 is then attached to the BT39 AIMB by means of the supplied 5/16-24 socket head cap screw. Weight: 5.4 ounces

The M6 x 80 x 80 Replacement Bolt is the same bolt we send standard with both the BT08-QK Accu-Shot Accuracy International (ASAI) Monopod and BT57-QK Accu-Shot Accuracy International AT Monopod. Available as a replacement. If additional length of pull spacers are being used, see our BT0857-LB: M6 x 80 x 100 Long Bolt

The M6 x 80 x 100 Long Bolt is compatible with both the BT08-QK Accu-Shot Accuracy International (ASAI) Monopod and BT57-QK Accu-Shot Accuracy International AT Monopod. It is required if additional length of pull spacers are used with Accuracy International buttstocks that our BT08-QK and BT57-QK are being installed on. If you are needing a replacement standard bolt, see our BT0857-B: M6 x 80 x 80 Replacement Bolt