Accessories

The BT80 M-LOK® Flush Cup Rail is designed for use with all M-LOK® compatible hand guards, forends and buttstocks. It has 5 usable slots and a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided). The BT80 can be used to attach any of our Picatinny rail mounted Atlas® Bipods, Accu-Shot® Monopods or Folding Foregrip. It requires standard M-LOK® sized slots for mounting. Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK® nuts. Available in black only.

• Length: 2.875"
• Center-to-center: 1.575"
• Width: 0.835"
• Weight: 1.038 oz

The BT79 Barrett® M107A1® Rail is a 5-slotted Picatinny rail for direct installation to the Barrett® M107A1® providing the means to mount our Atlas® Bipod Picatinny rail mounted bipods. It is also compatible with the Barrett® M82A1®. The center-to-center hole spacing of 3.359" fits the outer two holes of the existing three holes in the chassis. We strongly suggest that you measure the hole spacing on your rifle. The center section is machined to Picatinny rail standards from 4140 cold finished steel with a maganese phosphate finish. Two 3/8-16 x 3/4” flat head cap screws are provided. The original 11/16" nuts and tooth lock washers are reused to complete assembly. An 11/16" socket and ratchet wrench OR break-over bar and a 7/32” hex wrench is required for installation (none included). Check out installation instruction below. No modification needed.

• Overall Length: 4.309"
• Weight: 5.22 ounces

The BT07 Tac-Cap is an optional steel cap to replace the plastic cap that comes standard at the bottom of the knob of the Accu-Shot® Monopod. This is a durable upgrade intended for units that will experience hard surface use. As it is not surface friendly like the plastic cap, it can damage soft surfaces, such as scratch paint, etc. Installation of the Tac-Cap is friction-fit and requires no tools. However, we highly recommend permanently setting the Tac-Cap. This is a service we carryout at no additional charge when ordered with any Accu-Shot® Monopod, unless directed otherwise in the “notes” section of your order. Constructed from high-strength 1018 cold rolled steel with a manganese phosphate finish for corrosion resistance. Available in black only. Weight: 0.35 ounces

The BT03 M1-A/AR-15 A2 Stock Sling Stud Accessory replaces the standard Sling Loop found on many standard military style rifle stocks including the AR10, AR15 (A2 stock only) and M1A with a common “Sling Stud” often found on many bolt action rifles. Machined carbon steel with a manganese phosphate finish. Available in black only. Weight: 0.3 ounces

We are proud to offer the Bitter & Twisted Mortar model display. Constructed from turned and stamped Stainless Steel and quarter sawn American White Oak, this display is legitimate in structure with thoughtful details throughout.  The Mortar Barrel and Pinions are turned from 303 stainless steel bar stock with bored trunnion pockets. The trunnions are pressed into the pockets then welded in place. They rest on a pair of stainless steel bearing plates in the Mortar model Base and is retained by a pair of Stainless Steel Top Straps via two ¼-20 Stainless Steel Button Head cap screws per strap. They pass through the straps then into the side and thread into the Stainless Steel handle found on each Side of the Base. Strength is obtained and secured by steel on steel threads. Details below. Aside from a great conversation piece displayed on a desktop, mantle or as serious bookend — this Bitter & Twisted Mortar Model Display is 22 pounds of stainless steel and white oak that is proudly manufactured and assembled by Americans in Wichita, Kansas with love.

B&T Industries L.L.C. is proud to create a letter opener for our customers that want to have a serious desktop accoutrement with purpose and function.  We machined the Handle and Pommel from 300 series Stainless Steel then tumbled to compliment the blade. The blade, made by Spartan Blades, is machined from 440C Stainless Steel given a Rockwell Hardness of C 58-59 with a Cyro treatment followed by Alumina then Ceramic Blast and finally a PVD Chromium coating. The two Buna o-rings prevent rattling when sheathed for a stealthy presentation. The double ground edges along the length of the blade are not sharp, but the point is sharp. More specification and details below.

The Groupy measures groups within a 1.5” diameter. Measurements are laser cut into acrylic with a glow-in-the-dark cord attached. Shoot three to five shots. Lay Groupy over shot group. Adjust until one of the circles cross the center of the two outer most holes. Read measurement on that circle to determine group size.

The BT26 CAR Adaptor installed on your CAR collapsible stock allows any of our Precision Rail Monopod style monopods to be installed. This is a great option for shooters that want the LOP adjustments available with a collapsible stocks, but want the stability provided by the Accu-Shot. The BT26 replaces the factory loop on the stock while providing the means to re-attach the fixed sling loop with the loop on the left, right or bottom angled forward or backward. It is made of 1018 Cold Rolled Steel and treated with magnesium phosphate. Available in black only. Weight: 1.1 ounce

The BT55 Atlas® 5-H and Super CAL Rubber Feet are standard equipment on all 5-H and Super CAL models of Atlas® Bipods. They are easily installed with the press of a stainless steel plunger. Sold as a pair. Available in black only. Weight: 2.1 ounces Product will work on 5-H and Super CAL models only.

The BT56 LD 1/4-20 Adapter is a mounting solution to interface between a tripod or similar supporting device (shooting/walking/camera stick type monopod) with a standard ¼-20 threaded stud and a firearm. Weight: 0.8 ounces

The BT56 LD-L 1/4-20 Lever Adapter is a Picatinny Rail mounting solution to interface between a Tripod or similar supporting device (shooting/walking/camera stick type monopod) with a standard ¼-20 threaded stud and a firearm with Picatinny Rail. Once the BT56 LD-L is installed on your supporting device using the ¼-20 threaded hole, your Picatinny Rail equipped Rifle, Pistol or Shotgun can be quickly mounted and held to your supporting device. This is a great option for getting added support for hunting and tactical situations where a bipod is not practical. The BT56 LD-L will hold your supporting device to the firearm for transitioning or relocation of firearm. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. No hardware included. Available in black only. To order the without the installed ADM-170-S, view the BT56 LD 1/4-20 Adapter Weight: 2.7 ounces

The BT66 Atlas® 5-H and Super CAL BAS Ski Feet were developed from listening to customer feedback. Starting with 3.5" 6061-T6 bar stock, these monsters are made to slide in both the 90 and 45 degree leg positions. They are easily installed with the press of a stainless steel plunger to the 5-H and Super CAL models of Atlas® Bipod. Sold as a pair. Weight: 6.16 ounces Product will work on 5-H and Super CAL models only.