Skip to content

Unassembled, for Custom Coating

New, Unassembled Accu-Shot® Monopods for Coating

Unassembled Accu-Shot monopods are genuine models supplied as bare, disassembled components for a custom finish before reassembly. Buying unassembled lets your coater work with bare components for a clean, even finish, then you or they reassemble. These are for shooters who want a custom Cerakote or coating job done right. Every product is American-made and backed by a lifetime warranty.

Sling Stud Mount Accu-Shot® Monopod

Unassembled

The Sling Stud Mount Accu-Shot® Precision Monopod attaches to a standard rear sling stud and gives your buttstock fine, repeatable elevation control. Machined from 6061-T6 aluminum, Mil-Spec Type III hard anodized, with a QK Quick Knob for fast gross adjustment. Choose your height above; all locking models hold a set elevation with an additional thumbnut. Includes one 3/32″ Allen wrench for installation. Available in black only.

  • Standard (BT01-QK): elevation 3.50–4.65″, folded 3.65″, 6.5 oz
  • Standard Locking (BT04-QK): elevation 3.75–4.85″, folded 3.95″, 7.3 oz
  • Mid-Height Locking (BT05-QK): elevation 4.80–5.85″, folded 4.95″, 8.2 oz
  • Extended Locking (BT06-QK): elevation 5.70–6.85″, folded 5.95″, 9.0 oz

NOTICE: PART BT03 REQUIRED FOR USE WITH M1A/AR FAMILY OF RIFLES

$104.95 View

Precision Rail Mount Accu-Shot® Monopod

Unassembled

The Precision Rail Mount (PRM) Accu-Shot® Monopod attaches to a standard Picatinny rail and gives your buttstock fine, repeatable elevation control. Machined from 6061-T6 aluminum, Mil-Spec Type III hard anodized, with a QK Quick Knob for fast gross adjustment. Choose your height above. Available in black only.

  • Standard (BT12-QK): elevation 3.75–4.65″, folded 3.85″, 7.4 oz — NSN 1005-01-678-1553
  • Mid-Height (BT13-QK): elevation 4.75–5.65″, folded 4.80″, 8.3 oz
  • Extended (BT31-QK): elevation 5.65–6.60″, folded 5.80″, 9.0 oz
$124.95 View

BT57-QK: Accu-Shot Accuracy International AT Monopod

Unassembled

The BT57-QK Accu-Shot Accuracy International AT (ASAIAT) Monopod is designed specifically to fit the Accuracy International Accuracy Tactical Rifle (AT) and Accuracy Tactical Accuracy International Chassis Systems (ATAICS). Also Known as the Gen. 2 stocks. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Includes one M6 x 80 x 80 bolt. Available in black only.
  • Elevation Range: 3.00 - 4.15”
  • Folded Length: 4.10" approximate
  • Weight: 8.5 ounces
PLEASE NOTE: Customers with the Accuracy International AE, AW and AICS systems for the original thumbhole “Legacy” style stock sides, please see our BT08-QK.
$184.95 View

Why buy unassembled for coating

A coater gets a better result on bare, disassembled parts. Coating an assembled bipod risks uneven finish, masked tolerances, and trapped media. Unassembled components let the coater prep and spray every surface evenly.

  • Bare components ready for Cerakote or similar coatings.
  • No need to strip and mask an assembled unit.
  • Reassemble to factory spec after coating.

What is included

This category includes rail-mount, sling-stud, and Accuracy International / Sako monopods in unassembled form. Confirm the exact model and configuration on the product page so your coater has the right parts. If you would rather not disassemble or coat yourself, ask about B&T coating and disassembly services.

Choosing within Unassembled Accu-Shot Monopods for Coating comes down to a few key questions. We answer buying unassembled for custom coating, coating it yourself, and which option to choose below to help you decide.

Frequently Asked Questions

Why buy an unassembled Atlas for coating?

Coaters get a cleaner, more even finish on bare, disassembled components than on an assembled bipod. Unassembled products let every surface be prepped and sprayed without masking tolerances or trapping media.

Can I Cerakote an Atlas bipod myself?

You can, and unassembled components make it easier to do well. If you would rather not, B&T offers coating and disassembly services so professionals handle the prep and finish.

Do unassembled products keep the lifetime warranty?

Yes. Unassembled Atlas and Accu-Shot products are genuine and carry the lifetime warranty. Reassemble to factory spec after coating.

Which models are available unassembled?

Most core Atlas bipod and Accu-Shot monopod models are offered unassembled for coating. Check the product page for the exact model and configuration.

Get coating-ready components

Planning a custom finish? Browse the unassembled components, or ask our team about B&T coating and disassembly services.