Shop

The BT49 - 2.05" Adjustable Picatinny Rail has a center-to-center spacing of 1.2 - 1.6". Two machine screws can be used (not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. The BT49 can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods. NO HARDWARE INCLUDED. Available in black only.

• Length: 2.05"
• Weight: 0.4 ounces

"Experience the blend of reliability and lightness with the BTC-Pro clamp. This screw knob clamp offers precise control, ensuring secure attachment of your equipment while shedding unnecessary weight. For photographers and outdoor enthusiasts seeking the optimal balance between strength and portability, the BTC-Pro is your ultimate companion. No compromise on durability, no added burden - that's the BTC-Pro promise." - Really Right Stuff SOAR Division The BTC-Pro Bipod Clamp's Dual Combination Jaw allows for the attachment to either a Picatinny Rail or RRS 1.5" Dovetail Standard. It will bolt directly to any “NC” (No Clamp) style of Atlas® Bipods (except the 5-H which requires Extension Spigot for compatibility) using provided hardware. Compatible Atlas® Bipod models listed below. It will also bolt directly to our BT56LD 1/4-20 Lever Adapter. The BTC-Pro Bipod Clamp is CNC machined from 6061-T651 aluminum. Includes two (2) 10-32 x 3/8 flat-head screws and (1) 1/8" hex-key. Made in the USA. This clamp is manufactured by Really Right Stuff, SOAR Division NOT by B&T Industries, LLC. All warranty issues are to be processed through Really Right Stuff.

The BT63 Nose Rail fulfills the desire to get bipods further forward and closer to the bore. Inspired to raise the bipod’s Apex, the “Nose Rail” is designed to be bedded into a channel in the stock with threaded holes for attaching a second rail or sling studs to the bottom of stock. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. NO HARDWARE INCLUDED. Available in black only.

• Overall Length: 7.0"
• Picatinny Rail Section Length: 2.0"
• Center-to-center Hole Spacing: 3" and 3.75"
• Weight: 2.6 ounces

The BT73 M-LOK® Rail is designed for use with all M-LOK compatible hand guards, forends and buttstocks. It has 3 usable slots for attaching any of our Picatinny rail mounted Atlas® Bipods, Accu-Shot® Monopods or Folding Foregrip. It requires standard M-LOK sized slots for mounting. Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK nuts. Available in black only.

• Length: 1.575"
• Width: 0.835"
• Weight: 0.59 oz

For a direct M-LOK to "NC" (No Clamp) Atlas® Bipod interface, check out our BT70: Atlas® M-LOK® Adapter

The BT80 M-LOK® Flush Cup Rail is designed for use with all M-LOK® compatible hand guards, forends and buttstocks. It has 5 usable slots and a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided). The BT80 can be used to attach any of our Picatinny rail mounted Atlas® Bipods, Accu-Shot® Monopods or Folding Foregrip. It requires standard M-LOK® sized slots for mounting. Machined from 6061-T6 aluminum and Type III hard coat anodized. It comes with two 10-24 x 3/8 fasteners and two M-LOK® nuts. Available in black only.

• Length: 2.875"
• Center-to-center: 1.575"
• Width: 0.835"
• Weight: 1.038 oz

The BT79 Barrett® M107A1® Rail is a 5-slotted Picatinny rail for direct installation to the Barrett® M107A1® providing the means to mount our Atlas® Bipod Picatinny rail mounted bipods. It is also compatible with the Barrett® M82A1®. The center-to-center hole spacing of 3.359" fits the outer two holes of the existing three holes in the chassis. We strongly suggest that you measure the hole spacing on your rifle. The center section is machined to Picatinny rail standards from 4140 cold finished steel with a maganese phosphate finish. Two 3/8-16 x 3/4” flat head cap screws are provided. The original 11/16" nuts and tooth lock washers are reused to complete assembly. An 11/16" socket and ratchet wrench OR break-over bar and a 7/32” hex wrench is required for installation (none included). Check out installation instruction below. No modification needed.

• Overall Length: 4.309"
• Weight: 5.22 ounces

The Sling Stud Mount Accu-Shot® Precision Monopod attaches to a standard rear sling stud and gives your buttstock fine, repeatable elevation control. Machined from 6061-T6 aluminum, Mil-Spec Type III hard anodized, with a QK Quick Knob for fast gross adjustment. Choose your height above; all locking models hold a set elevation with an additional thumbnut. Includes one 3/32″ Allen wrench for installation. Available in black only.

• Standard (BT01-QK): elevation 3.50–4.65″, folded 3.65″, 6.5 oz
• Standard Locking (BT04-QK): elevation 3.75–4.85″, folded 3.95″, 7.3 oz
• Mid-Height Locking (BT05-QK): elevation 4.80–5.85″, folded 4.95″, 8.2 oz
• Extended Locking (BT06-QK): elevation 5.70–6.85″, folded 5.95″, 9.0 oz

NOTICE: PART BT03 REQUIRED FOR USE WITH M1A/AR FAMILY OF RIFLES

The BT07 Tac-Cap is an optional steel cap to replace the plastic cap that comes standard at the bottom of the knob of the Accu-Shot® Monopod. This is a durable upgrade intended for units that will experience hard surface use. As it is not surface friendly like the plastic cap, it can damage soft surfaces, such as scratch paint, etc. Installation of the Tac-Cap is friction-fit and requires no tools. However, we highly recommend permanently setting the Tac-Cap. This is a service we carryout at no additional charge when ordered with any Accu-Shot® Monopod, unless directed otherwise in the “notes” section of your order. Constructed from high-strength 1018 cold rolled steel with a manganese phosphate finish for corrosion resistance. Available in black only. Weight: 0.35 ounces

The BT03 M1-A/AR-15 A2 Stock Sling Stud Accessory replaces the standard Sling Loop found on many standard military style rifle stocks including the AR10, AR15 (A2 stock only) and M1A with a common “Sling Stud” often found on many bolt action rifles. Machined carbon steel with a manganese phosphate finish. Available in black only. Weight: 0.3 ounces

We are proud to offer the Bitter & Twisted Mortar model display. Constructed from turned and stamped Stainless Steel and quarter sawn American White Oak, this display is legitimate in structure with thoughtful details throughout.  The Mortar Barrel and Pinions are turned from 303 stainless steel bar stock with bored trunnion pockets. The trunnions are pressed into the pockets then welded in place. They rest on a pair of stainless steel bearing plates in the Mortar model Base and is retained by a pair of Stainless Steel Top Straps via two ¼-20 Stainless Steel Button Head cap screws per strap. They pass through the straps then into the side and thread into the Stainless Steel handle found on each Side of the Base. Strength is obtained and secured by steel on steel threads. Details below. Aside from a great conversation piece displayed on a desktop, mantle or as serious bookend — this Bitter & Twisted Mortar Model Display is 22 pounds of stainless steel and white oak that is proudly manufactured and assembled by Americans in Wichita, Kansas with love.

B&T Industries L.L.C. is proud to create a letter opener for our customers that want to have a serious desktop accoutrement with purpose and function.  We machined the Handle and Pommel from 300 series Stainless Steel then tumbled to compliment the blade. The blade, made by Spartan Blades, is machined from 440C Stainless Steel given a Rockwell Hardness of C 58-59 with a Cyro treatment followed by Alumina then Ceramic Blast and finally a PVD Chromium coating. The two Buna o-rings prevent rattling when sheathed for a stealthy presentation. The double ground edges along the length of the blade are not sharp, but the point is sharp. More specification and details below.

The Groupy measures groups within a 1.5” diameter. Measurements are laser cut into acrylic with a glow-in-the-dark cord attached. Shoot three to five shots. Lay Groupy over shot group. Adjust until one of the circles cross the center of the two outer most holes. Read measurement on that circle to determine group size.