Shop

About the 5-H Series: Our answer to requests for a "bigger and heavier" support with same novel Atlas® Bipod features. With five independent leg positions – including the patented 45° leg position – it also has the ability to Pan and Cant with adjustable tension and capability to lock out the Pan feature OR both the Pan and Cant by adjusting the depth of the supplied lockout fastener. Designed to support larger caliber rifles while finding value with all disciplines to include precision air rifles. Made in the USA. The BT35-NC model Atlas Bipod is part of our 5-H Series. The “NC” stands for “No Clamp,” meaning it requires a *compatible 17S size mount in order to attach to a firearm. The interface to install a clamp has a two hole pattern of 1.100” with 10/32 threads. It requires the ADM-5-H Lever (see BT35-LW17) or will mount directly to our BT19 AI Spigot or BT70 M-LOK^® Adapter. *If planning for installation of another 17S size mount, the BT35-NC requires Area 419's ARCALOCK Spigot Extension for clearance of the cradle and operation of the clamp's knob/lever. Optional mounts that we currently offer and require the Extension can be found here: Atlas Bipod Clamps & Adapters

BT78: SIG SAUER® CROSS™ Buttstock Rail Kit is a 2.05" Picatinny Rail that installs directly onto the folding buttstock of the SIG SAUER® CROSS™ rifle to allow for mounting our Accu-Shot Precision Rail Monopods (BT12-QK, BT13-QK and BT31-QK). Installation requires two factory 10-24 threaded holes spaced approximately 1.57" apart as found on our sample SIG SAUER® CROSS™ RIFLE (*see details below). No modification is required. Comes with two 10-24 x 3/4" flat socket cap screws as seen. Use of a thread locker upon installation is suggested. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only. Weight: 0.56 ounces Length: 2.05"

The BT39 AI Monopod Bracket (AIMB) is an adapter required to attach the BT08-QK ASAI monopod (used with the original “legacy” AI style stocksides) to the new Accuracy International “Gen 2” style stocksides. It is machined from 4140 steel with a manganese phosphate finish. Modification to the Buttstock Stocksides (skins) is required to accept the BT39 AIMB. The BT39 AIMB is mounted to the AI frame using your existing BT08 Stock Collar Fastener (this fastener is not included in the BT39, it is included with the BT08) being threaded to the lower AI butt pad bolt. The BT08 is then attached to the BT39 AIMB by means of the supplied 5/16-24 socket head cap screw. Weight: 5.4 ounces

The M6 x 80 x 80 Replacement Bolt is the same bolt we send standard with both the BT08-QK Accu-Shot Accuracy International (ASAI) Monopod and BT57-QK Accu-Shot Accuracy International AT Monopod. Available as a replacement. If additional length of pull spacers are being used, see our BT0857-LB: M6 x 80 x 100 Long Bolt

The M6 x 80 x 100 Long Bolt is compatible with both the BT08-QK Accu-Shot Accuracy International (ASAI) Monopod and BT57-QK Accu-Shot Accuracy International AT Monopod. It is required if additional length of pull spacers are used with Accuracy International buttstocks that our BT08-QK and BT57-QK are being installed on. If you are needing a replacement standard bolt, see our BT0857-B: M6 x 80 x 80 Replacement Bolt

For anyone that wishes to apply a finish to a currently owned B&T Accu-Shot® Monopod: When applying an aftermarket finish that requires the use of heat or disassembly to any B&T Accu-Shot® Monopod, we respectfully ask that you send that product to us so we can properly disassemble and return all appropriate parts to you for application of the finish. Once the finish is applied and the parts are returned to B&T, we will reassemble them to our specifications and ship it back to you. Please ensure parts are packaged appropriately to avoid any damage in transit. B&T will not be responsible for the finish or any damage to the finish. Anyone that disassembles, loses, breaks parts in an attempt to disassemble or cannot reassemble their Accu-Shot® Monopod will be charged $75.00 plus parts minimum. Anyone choosing not to use this service does so at their own risk and liability voiding the monopod's Lifetime Warranty. B&T Industries L.L.C. does not sell or ship replacement parts.

For anyone that wishes to apply a finish to a currently owned B&T Atlas® Bipod: When applying an aftermarket finish that requires the use of heat or disassembly to any B&T Atlas® Bipod, we respectfully ask that you send that product to us so we can properly disassemble and return all appropriate parts to you for application of the finish. Once the finish is applied and the parts are returned to B&T, we will reassemble them to our specifications and ship it back to you. Please ensure parts are packaged appropriately to avoid any damage in transit. B&T will not be responsible for the finish or any damage to the finish. Anyone that disassembles, loses or breaks any parts in an attempt to disassemble/reassemble their Atlas® Bipod will be charged $105.00 plus parts minimum. Anyone choosing not to use this service does so at their own risk and liability voiding the bipod's Lifetime Warranty. B&T Industries L.L.C. does not sell or ship parts.

This image is a print from the actual negative, no different than the one featured in the battle photograph. Read "The Story of the Cap" below. These are die cut at 1.5" in diameter and come ready to install.

Black Gildan 100% cotton T-shirt with U.S. Snipers Spade logo on back measuring about 12” high with a small 3” round U.S. Snipers logo on front left chest. The spade logo was a co-op job. Mike McMillan of CSM Gear suggested using the spade and our artist came up with the lettering and design.

Sand Gildan 100% cotton T-shirt with line art on the back of a SF sniper in Fallujah with text, “Converting terrorist one bullet at a time.” Features 3” round US Snipers logo on front left chest. Line art measures about 14” wide and created by a young lady free hand from a photo supplied by a member of the Special Forces.

Discover all brands, products and offerings from B&T Industries, LLC compiled neatly in a 3.5 x 4.5" wire bound booklet. Inside you'll find each product with a summary of features and specifications highlighting the basic information you need to answer your questions of support and application. Forget an oversized catalog with fancy images. Our booklet showcases a clean image with easy to reference call outs while taking up minimal space in your shop draw and fits expertly into a cargo pocket. Printed locally in Wichita, KS, USA.

This poster is a battle field photo showing a U.S. Special Forces Sniper in a hide in An Najaf. He was using a 55 gallon drum and a piece of wood for a table, the light coming through the spider hole is the only illumination in this dark and dangerous setting, fitting for the; "Yea, though I walk through the valley of the shadow of death" 23 Psalms. Printed on 100# cover stock. Measures 16 x 20" and is sized ready to frame in a standard frame.